Level limit controller TS-KGS-W1222

Level limit controller TS-KGS-W1222

Available for 2-wire or 3-wire level limit switches such as TS-KGS-25

Two independent relay outputs

Preconfigured program for pump control

Integrated power supply unit to supply the connected sensors with 12 V DC

product description Level limit controller TS-KGS-W1222

  • Available for 2-wire or 3-wire level limit switches such as TS-KGS-25
  • Special design for 2-wire level limit switches with additional programming wire such as TS-KGS
  • Two independent relay outputs
  • Preconfigured program for pump control
  • Integrated power supply unit to supply the connected sensors with 12 V DC
  • Optical status indication
  • Simple handling and installation
  • IP 65 housing, designed for wall mounting

The level limit controller TS-KGS-W1222 is designed for the evaluation of 2-wire or 3-wire level limit switches. For 2-wire level limit switches with additional programming wire, such as TS-KGS, a special design for simplified sensor configuration is available. The level limit controller provides a supply voltage of 12 V DC for the sensors and controls two independent Relay outputs. The TS-KGS-W1222 is standard equipped with a preconfigured program for pump control (monitoring of a liquid level between minimum and maximum), which can be enabled by a DIP switch.

Technical data type TS-KGS-W1222

Operating Voltage UB 230 V (50 Hz) ±10 %
Nominal power demand 4 VA
Sensor supply voltage 12 V DC ±10 %
Maximum output current (including inputs IN1, IN2) 50 mA
No. of level limit sensors 1 oder 2
No. of relay outputs 2
Relay output type 250 V AC, 2 A, 500 VA
Max. switching frequency at maximum load 360 / h
Ambient temperature range -20 … +50 °C
Max. / recommended conductor size Max. 2,5 mm2 / 0,14 … 0,5 mm2
Housing material ABS + Fiberglas
Protection class IP 65
Weight ~ 350 g
Electrical safety and electromagnetic compatibility: The level limit controller TS-KGS-W1222 is equipped with an overload protection. The control is protected by a fuse type T 50 mA. Certified electrical safety and CE conformity according to directive: EN 61010-1. Electromagnetic compatibility according to directive: EN55022, EN61000-4-2, -3, -4,-5, -6 und EN 6100-6-2.