Capacitive level limit switch TS-KGS

• Level limit monitoring for liquids in non-conductive plastic and glass vessels
• Flexible polyurethane-housing, IP 67
• Simple mounting and fast sensor configuration
• Suitable for bent vessel surfaces above 200 mm diameter
• LED status indicator
• Ambient temperature -10 ... +60° C
• Configurable as NO or NC contact
• Intelligent μC electronic compensates contamination on the internal side of the vessel

The capacitive level limit switches TS-KGS are designed to monitor level limits of liquids in nonconductive plastic or glass vessels. The flexible polyurethane-housing is mounted with self adhesive layer directly on the vessel. The sensor has to be mounted on the height of the level limit which is to be monitored. The maximum possible thickness of the vessel wall is depending on the permittivity ε_r (dielectric conductivity) of the filling medium. The configuration of the TS-KGS sensor as overfill or dry run protection is performed simple and fast by attaching the programming wire on the positive
or negative potential of the supply voltage. The TS-KGS can be attached directly to a relay or a control with binary inlet. A separate sensor control for wall mounting with sensor supply and relay outputs and LED status indicators is available optionally.