Multifunction display TS-S 110

• Multifunction display for standard signals in a IP65 field housing with hinged cover, dimensions 100 x 100 x 60 mm
• 3 control buttons, red 14.2 mm 4-digit LED display, optical switching status display of any optional outputs
• One input for standard signals (optionally 0 ... 20 mA, 4 ... 20 mA or 0 ... 10 V DC) and potentiometer (0 ... 1 kΩ/100 kΩ)
• Integrated 24 V transmitter supply
• Power supply of the multifunction display with 24 V DC or 24, 115 or 230 V AC (50-60 Hz)
• Optionally with 2 alarm outputs (relay changer) and / or one analog output (0/4 ... 20 mA, 0/2 ... 10 V DC)
  
• Optionally available with minimum and maximum value memory or dimmable display brightness
• Easy installation and operation via 3 control buttons

The multi-function display TS-S 110 is designed as a stand-alone solution for displaying the measured value of sensors with standard signal output (0 ... 20 mA, 4 ... 20 mA or 0 ... 10 V DC). For example, as a local display of levels that are detected by level probe. The TS-S 110 has a signal input with integrated 24 V sensor supply. Optionally, the display can be used as a limit switch and be equipped with 2 alarm outputs (relay change-over contacts) and one analog output (0/4 ... 20 mA, 0/2 ... 10 V DC). A minimum and maximum value memory or dimmable display brightness are further available additional options. The supply voltage of the multifunction display can be selected from various variants.