Temperature switch TS-TSD 30

Temperature switch TS-TSD 30

Rotatable, easily readable and rugged 14-segment LED display

Temperature range from -20 … +80º C

Simple menu navigation (acc. to VDMA standards)

User-friendly 3-button control

Up to two switching outputs and one analog output possible

product description Temperature switch TS-TSD 30

The electronic temperature switch TST-TSD 30 is designed for temperaure monitoring in a wide variety of applications such as mechanical engineering, hydraulics, pneumatics, pumps and compressors or climate technology. The TST-TSD 30 is equipped with a Pt1000 DIN EN 60751 / class A, 2-wire sensing element in a 6mm diemater temprature sensor. The installation length of the sensors can optionally be 25, 50, 100, 150, 250 or 350 mm with a maximum oparating pressure of 150 bar.The TST-TSD 30 has an easy-to-read and robust 14-segment LED display, user-friendly 3-button operation and easy menu navigation according to the VDMA standard.

During commissioning, the TST-TSD 30 can be flexibly adapted to any installation situation. The lower housing part of the stainless steel sensor and the display part made of glass-fiber reinforced PBT plastic are double-rotatable. The display and the electrical M12x1 connection can be rotated independently of each other by more than 300°. Therefore the display can always be aligned in the direction of the operator and the M12x1 connector according to the desired cable routing. If the device is to be installed overhead, the displayed value can be rotated electronically by 180°. Housing and threaded connection of the electrical connector are made of stainless steel. Over-tightening or tearing off the plug is almost impossible.

The electronic temperature switch TST-TSD 30 is in standard designed foe a measuring range of -20 ... +80 °C, starting with an installation length of 100 mm ia higher measuring range of -20 ... +120 °C is optionally available.

Following process connections are available for the TST-TSD 30 series switches: G 1/8"A, G 1/4"A, G 1/2"A, 1/4 NPT or 1/2 NPT. Optionally the TST-TSD 30 can be equipped with a compression fitting.

The electronic temperature switch TST-TSD 30 can be equipped with one or two PNP or NPN switching outputs, and an additional 4 ... 20 mA or 0 ... 10 V DC analog output. All the above combinations are optionally available with additional IO-Link.

Further details on the TST-TSD 30 can be found in the data sheet.